Resetting alarm.com cameras

This is how to factory reset alarm.com video cameras

Factory resetting an alarm.com camera by following the specific factory reset process for that camera. Each ADC camera follows a slightly different process. Most ADC cameras can be factory reset by pressing and holding the device's reset button for a specific period of time.
 
After the factory reset process for the camera is complete, the device should remain plugged-in and left alone for at least 2 minutes. The device will then be factory reset.
 
Refer to the instruction manual for the device for more information.
 
 
 
 
 
The factory reset processes for most alarm.com cameras are outlined below:
ADC-V700X: Press and hold the reset button inside the back of the camera until the LED light on the device rapidly flashes red. This will take about 90 seconds.
ADC-V510: Press and hold the reset button on the device until its LED light rapidly flashes red. This will take about 60 seconds. You will need a paperclip to press and hold the reset button.
ADC-V610PT: Press and hold the reset button on the device until its LED light rapidly flashes red. This will take about 60 seconds. You will need a paperclip to press and hold the reset button. The reset button can be found underneath the camera.
ADC-VS1: Press and hold the reset button on the device until its LED light rapidly flashes red. This will take about 60 seconds. You will need a paperclip to press and hold the reset button.
2GIG CAM-HD100: Press and hold the reset button on the device until its LED light rapidly flashes yellow. This will take about 10 seconds. 
ADC-VS120: Press and hold the reset button on the device until its LED light rapidly flashes red and green. This will take about 15 seconds. You will need a paperclip to press and hold the reset button.
ADC-VS420: Press and hold the reset button on the device until its LED light rapidly flashes red and green. This will take about 15 seconds. You will need a paperclip to press and hold the reset button.
ADC-V520: Press and hold the reset button on the device until its LED light rapidly flashes red and green. This will take about 15 seconds. You will need a paperclip to press and hold the reset button.
ADC-V620PT: Press and hold the reset button on the device until its LED light rapidly flashes red and green. This will take about 15 seconds. You will need a paperclip to press and hold the reset button.
ADC-V720: Press and hold the reset button on the device until its LED light rapidly flashes red and green. This will take about 15 seconds. 
ADC-V720W: Press and hold the reset button on the device until its LED light rapidly flashes red and green. This will take about 15 seconds. The reset button is the same as the WPS button.
ADC-V721W: Press and hold the reset button on the device until its LED light rapidly flashes red and green. This will take about 15 seconds. The reset button is the same as the WPS button.
ADC-V722W: Press and hold the reset button on the device until its LED light rapidly flashes red and green. This will take about 15 seconds. The reset button is the same as the WPS button.
ADC-V820: Press and hold the reset button on the device until its LED light rapidly flashes red and green. This will take about 15 seconds. The black reset button is inside the camera on the back.
ADC-SVR100: Press and hold the reset button on the device until its LED light rapidly flashes red and green. This will take about 15 seconds. You will need a paperclip to press and hold the reset button.
 
IMPORTANT
If a camera has already been connected to an alarm.com account it must be deleted before it can be reconnected to another account.
 
This video (click to watch) shows how to delete a camera from the alarm.com customer portal.

OnGuard Security Solutions

6330 E 75th St Suite 120
 Indianapolis, IN 46250
Monday - Friday: 8am - 8pm
 Saturday: 9am - 5pm
 Sunday: Closed
6330 East 75th Street., Suite 120 Indianapolis, IN 46250